Ricoh 2400L - Manual (Page 241)

LOCATION
For the best possible performance, install your machine in a place which satisfies
the following conditions.
F
Not exposed to direct sunlight
F
Well ventilated (air turnover at least three times per hour); to avoid the build-up
of ozone, make sure to locate the machine in a large well-ventilated room
which has an air turnover of more than 30 yd
3
/hr per person.
F
Level
F
Not subject to vibration
F
Away from other electronic equipment, to avoid interference
F
Away from areas containing corrosive gas
F
Dust-free
F
Condensation-free
F
Temperature 63 to 82
°
F
F
Humidity 40 to 70% RH (do not install near a humidifier)
F
Away from heaters and air conditioners, to avoid sudden changes of
temperature
F
Within 5 yards of a three-pin grounded
power outlet (115 Volts, 60 Hz)
F
With the clearance as shown on the right
NOTE: This machine generates a certain
amount of ozone. Although the
amount generated is within safety
requirements, it is recommended
that, to avoid ozone buildup, you
install the machine in a room which
is properly ventilated.
INSTALLING THE MACHINE
4"
4"
4"
28"
24