Ricoh 2400L - Manual (Page 539)

If the RTI/CSI of the machine sending you a fax is not the same as any of those
that you have programmed into this feature, the message will not be forwarded.
Cross-references
RTI and CSI: see page 189.
Wild Cards: see page 91.
TCR: see page 123.
Programming the Forwarding Feature
This section shows you how to set up your machine to forward incoming fax
messages to another location or locations.
1. Function 6 2 2 2 2 8 2 and Yes.
To print a list, press
k
.
SETTING? Y/j k
PRINT LIST j /SEARCH k
2. Yes. FORWARD KPAD/j k
t t t t t t t t t t t t t t t t t t t t
3. Store a forwarding station number.
Example: 2 1 2 5 5 5 1 2 3 4
If your machine is behind a PBX, add
the access code before the number, un-
less this forwarding station is an exten-
sion connected to the same PBX as
your machine. Press Yes.
FORWARD KPAD/Y/N
2125551234t t t t t t t t t t
4. Either:
❐ If you wish all incoming messages
to be forwarded to this station: No.
Do not store any RTIs/CSIs for it. FORWARD Y/N
SET RTI/ CSI?
❐ If you only wish messages from
certain senders to be forwarded to
this station:
Input their RTI’s or CSI’s (mes-
sages from senders other than
these will not be forwarded to this
station): Yes and go to step 5. RTI/CSI ABC Y/N
t t t t t t t t t t t t t t t t t t t t
5. Type in an RTI or CSI.
For how to enter characters, see page 166.
RTI/CSI ABC Y/N
XYZ COMPANYt t t t t t t t t t
6. Yes. RTI/CSI Y/N
STORE AS WILD CARD?
7. Either:
❒ Store this RTI as a wild card: Yes.
❒ Otherwise: No.
FORWARD Y/N
SET RTI/ CSI?
AD
V
A
N
C
E
D
FE
A
T
U
R
E
S
ADVANCED FEATURES RECEPTION
83