Ricoh 2400L - Manual (Page 342)

3. Input the Memory Lock ID that you will be
using. Example: 6 7 5 4 from the ten key
pad.
LOCK ID Y/N
6754
4. Store the ID: Yes and Function.
Editing the Memory Lock ID
1. Function 6 2 2 2 2 6 1 and Yes SYSTEM SET Y/NEXTk
SET OWN NUMBER
2. Press
k
until the screen is as shown op-
posite.
Y/NEXTk
SET MEMORY LOCK ID
3. Yes LOCK ID CHANGE? Y/N
5477
4. Yes LOCK ID Y/N
5477
5. No and input a new number. LOCK ID Y/N
5478
6. Yes and Function.
Switching Memory Lock On/Off
Before you can use Memory Lock, you have to switch it on using Function 62.
After you switch Memory Lock on, ( MEMORY L OCK) will appear on the display
when the machine is in standby mode.
Note: If you switch Memory Lock on, Forwarding will be automatically disabled.
1. Function 6 2 2 2 2 6 2 and Yes. Y/NEXTk
SELECT LINE
2. Scroll through the features with
k
until the
screen is as shown opposite.
Y/NEXTk
MEMORY LOCK ON/OFF
3. Yes. MEMORY LOCK Y/j k
ON kOFF
4. Change the on/off setting by pressing
j
or
k
.
MEMORY LOCK Y/j k
kON OFF
5. Finsh
:
Yes and Function.
If you wish, you can prevent unidentified senders from sending you messages while Memory
Lock is on. See page 129.
RECEPTION ADVANCED FEATURES
126