Ricoh 2400L - Manual (Page 307)

Transfer Request
Transfer Request helps you save costs when you send the same message to
more than one place in a distant area.
F
Your machine sends the message to the Transfer Station, which holds it in
memory.
F
The Transfer Station then sends it on to each of the End Receivers in
sequence.
F
After broadcasting, the Transfer Station sends your machine a Transfer Result
Report to tell you if there were any problems with the communication.
Note:
F
This feature can only be used if the Transfer Station was made by the
same maker as your machine.
F
The ID Code of your machine must be the same as the ID Code of the
Transfer Station.
F
Your fax machine’s telephone number must have been programmed in
advance.
F
The Transfer Station must have memory space available, and must be
able to act as a Transfer Station (some machines cannot do this, or
can but the capability has been switched off).
Note: This machine cannot be a Transfer Station.
You cannot dial the End Receivers as full numbers on your ten-key pad, and you
cannot use your own stored Speed Dials, Quick Dials, and Groups. You must use
the numbers that are stored in the Transfer Station. Always keep a copy of the
Transfer Station’s Telephone Lists (Quick Dial, Speed Dial, and Group Lists) near
the machine if you plan to use Transfer Request.
Cross-reference
Quick Dial and Speed Dial: see pages 42 and 44. Groups: see page 43.
ID Code: see page 93.
ADV
ANCED
FEA
T
UR
E
S
ADVANCED FEATURES TRANSFER REQUEST
91