Ricoh 2400L - Manual (Page 258)

1. Either:
H
If you enter the CSI from the standby
mode, press Function, 6, 2, 2, 2, 2, 6, 1
and Yes. And then press
k
until the
screen is as shown opposite. Finally
press Yes.
H
If you have just entered the TTI in
the previous procedure, press Yes.
Y/NEXTk
SET CSI
CSI KPAD
t t t t t t t t t t t t t t t t t t t t
2. Input your telephone number.
Example: 2125556789
CSI KPAD/Y/j k
2125556789t t t t t t t t t t
Note: Not more than 20 digits.
F
If you wish to input a "+" sign by Quick Dial 28 (Symbol), to signify your
international dial access code (this is a common practice in Europe).
3. Yes and Function.
Telephone Line Type
If the setting of this feature is incorrect, you will not be able to dial using the
machine’s keypad or automatic dialer.
There are two basic types of telephone company exchange:
F
Exchanges using Tone Dialing (also known as touch tone, DTMF, TT, or
sometimes PB)
F
Exchanges using Pulse Dialing (also known as rotaty dial, PD or DP)
The telephone line type setting in your fax machine must match the type of
exchange that you are connected to. If you are not sure what type your local
exchange is, ask the telephone company.
Note: If there is a handset connected to your fax machine, make sure that it is
also set up in the correct dialing mode.
Change the line type setting for the fax machine using Function 62.
1. Press Function 6 2 2 2 2 6 2 and Yes.
Make sure that the display is as shown
opposite
Y/ NEXTk
SELECT LINE
2. Press Yes.
PD = Pulse Dial, TT = Touch Tone. In
the above display, TT is currently se-
lected.
SELECT LINE Y/j k
kTT PD
3. Change the setting by using
j
or
k
.
4. To finish, press Yes and Function.
BEFORE YOU SE
ND
YOUR
FIRST
F
A
X
BEFORE YOU SEND YOUR FIRST FAX
41