Ricoh 2400L - Manual (Page 570)

Which Saving Energy Mode is Best for You?
You have two choices: You can let the roller cool to room temperature or you can
let it cool to the midpoint. To choose which of the two settings you would prefer,
set the user parameter switch.
When you allow the roller to cool to room temperature, energy saving is at a
maximum and printing will take a little longer since the roller will take more time to
come to printing temperature. When you select the midpoint, energy savings will
still be achieved and printing will occur more rapidly.
1. Function 6 2 2 2 2 6 3 and Yes. SETTING? Y/j
PRINT LISTj
2. Yes.
The settings for switch 00 are now
shown on the bottom line of the display.
KPAD/Y/j k
SWITCH 00 : 0000 0000
3. Press
k
until the settings for switch 05 are
shown.
KPAD/Y/j k
SWITCH 05 : 0000 0000
The settings that you need to change is
digit 6 (double underline).
5916+0#
4. Set one of the two as shown opposite.
To change digit 6, press 6.
If you want to let the roller cool to
room temperature.
5916+0#
If you want to let the roller cool
halfway.
5. Finish: Yes and Function.
OTHER ADVANCED FEATURES
114