Ricoh 2400L - Manual (Page 603)

Replacing the Photoconductor
You should replace the photoconductor to maintain the copy quality after about
every 30,000 sheets have been printed.
If the following display appears, replace the photoconductor.
REPLACE PC
m
SET DOC. OR DIAL NO.
To check how many sheets you’ve printed, please refer to the section titled
"Counters" (see page 118 ).
1. Lift up the operation panel.
2. Open the upper cover.
3. Remove the toner cassette.
NOTE: Do not shake the cassette,
or toner may spill out.
LOOKING AFT
E
R
T
H
E
MA
CHINE
LOOKING AFTER THE MACHINE USER MAINTENANCE PROCEDURES
147