Adjusting the document feeder – Ricoh 2400L User Manual
Page 416
Adjusting the Document Feeder
Depending on the thickness of the paper, three settings can be selected; thin,
normal, and thick.
1. Open the operation panel.
2. To meet the paper type to be scanned, adjust the lever position as shown in
the following table.
Paper Thickness
Pressure
Position
Thin
Low
1
Normal
Normal
2
Thick
High
3
To correct document feed problems, adjust the lever position as shown in the
following.
Problem
Position
Multi-feed Thin sheet
1
Multi-feed Thin sheet
3
Feed Jam
1
Non-feed
3
Note:
In a new machine the setting is middle position.
1
2
3
DOCUMENT JAMS
SOLVING PROBLEMS
200