Ricoh 2400L - Manual (Page 906)

Programming a New Speed Dial
1. Function 3 2 and Yes.
2. Input the Speed Dial Code that you wish
to program (from 00 to 99).
Example:
If you program the Speed Dial code 01,
press 0 and 1 from the ten key pad
3. Yes.
4. Enter the telephone number at the opera-
tion panel’s ten key pad.
If your machine is behind a PBX, include the access code and a pause before the telephone
number. For an international number, place a pause after the country code. To input a
pause, press the Pause key.
5. Yes.
6. Either:
❐ If you want to program the label for
this Speed Dial, press Yes.
❐ Do not program a label for this
number: Press No and go to step 9.
7. Enter a label.
Inputting and editing labels: see page
182.
!" #
8. Yes. $$
9. Switch Label Insertion On or Off using
or , then Yes.
10. Either:
❐ Program another: Go to step 2.
❐ Finish: Function.
I
NIT
IAL
SET
TI
NGS
APPENDIX QUICK DIAL, SPEED DIAL, AND GROUP DIAL
215