Ricoh 2400L - Manual (Page 272)

SENDING A FAX MESSAGE
Precautions Concerning Unacceptable Document Types
Before you send your document, make sure that it meets the following
requirements.
Caution: Documents that do not meet these requirements can cause your
machine to jam or may cause some components of the machine to become
damaged or dirty.
* The part shaded will not be scanned,
because it is outside the maximum scanning width range.
Correct Size for the Document Feeder
Thickness: 2 to 8 mils (20 lb paper)
Length and Width: See the above diagram.
If the page is too short, put it inside a document carrier or enlarge it with a copier.
If the page is too long, divide it into two or more sheets.
Clearly Written
Small faint characters may not be transmitted clearly.
Uniform Page Size
Do not use different sizes of document in the same transmission.
Dry Ink
All ink must be dry before you place the document in the feeder.
4.1"
5.8"
Minimum
8.5"
12.0"
47.2"
ROUTINE OPERATION
Maxmum
56