Ricoh 2400L - Manual (Page 544)

Specified Cassette Selection (Optional Paper Feed Cassette Required)
Overview
This feature is only available if your machine has the Lower Cassette. Using this
feature, you can select fax messages from certain senders to be printed from a
specified cassette.
Example:
Put yellow paper in the specified cassette. Then, messages from the head office
can be printed out on yellow paper; this will make it easy for you to see when a
message from head office has arrived.
❐ Program the senders you want to print from the specified cassette (Function
81). Do by this by programming the RTI’s or CSI’s as Special Terminals. (Ask
the sending party what their RTI/CSI is. Or make a communication with that
terminal, print a TCR, and read off the RTI/CSI.)
If the other party is using a machine made by another maker, they may not be
familiar with the terms RTI or CSI. Explain that you are interested in the
telephone number that they stored in the machine for identification purposes.
❐ Switch Specified Cassette Selection on. (Function 62)
❐ Select which messages to print using paper from the specified
cassette(Function63):
a) Only messages from special terminals.
b) All messages except those from Special Terminals.
NOTE: If one of the senders changes their RTI/CSI, you have to change the
stored RTI/CSI also. Otherwise, messages from that sender will no longer
be sent to the required cassette.
Cross-references
RTI and CSI: see page 189.
Wild Cards: see page 91.
TCR: see page 123.
NOTE: ❐ Messages from senders that have RTI/CSIs that match those that
were input using the above procedure will be printed using the speci-
fied paper cassette.
❐ First of all, you must programming Special Terminals for cassette selec-
tion. (Function 81)
RECEPTION ADVANCED FEATURES
88