Ricoh 2400L - Manual (Page 110)

Options for Polling Transmission
When you store a document in memory for Polling Transmission, you also have
the following options:
❐ Personal Code: This is the same as for normal transmission (see page 27 )
❐ Page Count:This is the same as for normal transmission (see page 30 )
❐ TTI On/Off: This is the same as for normal transmission (see page 31).
❐ Polling Standby Duration: There are two options.
ONCE : The message will be automatically erased from memory after it has
been polled once.
KEEP : The message will be kept in memory until you erase it yourself using
Function 63 (user parameters). While the message is in the memory,
it can be polled at any time by as many terminals that need it.
The options are only available if OPT k
can be seen in the top right corner of the
display:
1. Press
k
. SET OPTION Y/k
SET PERSONAL CODE?
2. Scroll through the options using the
k
on
the scroll key. Select the option you
want using Yes.
Example: TTI on/off.
SET OPTION Y/k
TTI PRINT?
The list of available options is as follows:
❐ Personal Code
❐ Page Count
❐ TTI
3. If you wish to switch on or off (TTI), use
j
and
k
of the scroll key until the dis-
played setting is correct.
4. Either:
❐ If you wish to switch other options
(Personal Code or Page Count),
press
k
of the scroll key until the re-
quired option is shown. Then enter
the personal code on page count.
❐ Finish: Yes and Function.
AD
V
A
N
C
E
D
FE
A
T
U
R
E
S
ADVANCED FEATURES OTHER
101