Temporarily switching the heating roller on – Ricoh 2400L User Manual
Page 573

8. Repeat from step 5 for the second timer.
Press
k
to move the cursor under the
time.
TIMER#2 TUE
∗
/#/Y
ON FROM 12:00AM
Input on the time, 0 6 0 0, for example, on
the ten keypad.
To change AM to PM and the other
way around, press #. Accept the setting
by pressing Yes.
TIMER#2 TUE
∗
/#/Y
ON FROM 06:00PM
TO KEEP THE HEATER ON ALL DAY: Set both timers to ON = 12:00AM.
TO KEEP THE HEATER OFF ALL DAY: Set both timers to OFF = 12:00AM.
9. Either:
❐
Program the timer for another day: Go back to step 3.
❐
Finish: Yes and Function.
NOTE: To print the received messages while the heater is off, press any key. After all the
messages have been printed, the heater will stay on for 5 minutes before switching off again.
Because of this, the Night Timer does not give you complete security for received documents.
For this type of security, use the Memory Lock feature; see page 74.
Temporarily Switching the Heating Roller On
During periods of the Night Timer cycle that the heating roller is off, it may be
switched on in these ways:
❐
When you hold the Energy Saver key down for a few seconds.
❐
When you insert a document in the feeder.
❐
When you pick up the handset, or press On Hook Dial key.
After you leave the machine alone for a while, the heating elements will turn back
off. Note that if Automatic Saver mode is disabled by a service technician, the
night timer will not turn back on.
AD
V
A
N
C
E
D
FE
A
T
U
R
E
S
ADVANCED FEATURES
OTHER
117