Ricoh 2400L - Manual (Page 35)

3. The settings for switch 00 are now shown
on the bottom line of the display.
SWITCH00:0000 0000
Digit 7 6 5 4 3 2 1 0
The digits are numbered from 7 to 0;
the setting of digit 7 is shown at the left
side of the display and digit 0 is at the
right.
The settings that you may need to change are those for digits 0, 1, 2, 3, 4, 5,
6, and 7. The functions of these are as follows.
Digit Purpose
0 Do not use this setting.
1
2
Contrast home position
Digit 2 Digit 1 Setting
0 0
Normal*
0 1 Lighten
1 0
Darken
3 Do not change this setting.
4
5
Resolution home position
Digit 5 Digit 4 Setting Digit 5 Digit 4 Setting
0 0 Standard* 1 0 Fine
0 1 Detail 1 1 Do not change these
settings.
6
Tramsmission mode home position
0: Memory Transmission*
1: Immediate Transmission
7 Halftone on/off home position 0: Off* 1: On
3. If you wish to change one of the settings, press the key on the ten keypad that
corresponds to the digit that you wish to change.
Example: 3 on the ten keypad. The value of digit 3 changes.
4. Finish: Yes and Function.
SENDING A FAX MESSAGE ROUTINE OPERATION
26