Location, Appendix a installation and initial settings – Ricoh 2400L User Manual
Page 172

LOCATION
For the best possible performance, install your machine in a place which satisfies
the following conditions.
❐
Not exposed to direct sunlight
❐
Well ventilated (air turnover at least three times per hour); to avoid the build-up
of ozone, make sure to locate the machine in a large well-ventilated room
which has an air turnover of more than 30 yd
3
/hr per person.
❐
Level
❐
Not subject to vibration
❐
Away from other electronic equipment, to avoid interference
❐
Away from areas containing corrosive gas
❐
Dust-free
❐
Condensation-free
❐
Temperature 63 to 82
°
F
❐
Humidity 40 to 70% RH (do not install near a humidifier)
❐
Away from heaters and air conditioners, to avoid sudden changes of
temperature
❐
Within 5 yards of a three-pin grounded
power outlet (115 Volts, 60 Hz)
❐
With the clearance as shown on the right
NOTE: This machine generates a certain amount of ozone. Although the
amount generated is within safety requirements, it is recommended
that, to avoid ozone buildup, you install the machine in a room which
is properly ventilated.
APPENDIX A INSTALLATION AND INITIAL SETTINGS
4"
4"
4"
28"
A
P
PE
NDIX
A
163