Ricoh 2400L - Manual (Page 228)

4. Either:
F
Scroll through the switches with
j
and
k
until the required switch appears.
Then go to step 3.
F
Finish: Yes and Function.
The user parameter switches are outlined below.
*: Default
Switch 00 - Home position settings
Digit Purpose
0
Stamp 0: Off *
1: On (successfully scanned documents will be marked)
1
2
3
Contrast home position
Digit 3 Digit 2 Digit 1 Setting Digit 3 Digit 2 Digit 1 Setting
0 0 0 Normal * 1 X X Do not use this
0 0 1 Lighten
setting.
0 1 0 Darken
4
5
Resolution Digit 5 Digit 4 Setting Digit 5 Digit 4 Setting
0 0 Standard* 1 0 Fine
0 1 Detail 1 1 Do not use this.
6
Transmission mode 0: Memory transmission*
1: Immediate transmission
7 Halftone 0: Off* 1: On
Switch 01
Digit Purpose
0 to 6 Do not change these settings.
7
If you change any of the contrast, resolution, transmission mode, stamp, or halftone
setting before making a transmission, then:
0: The setting(s) will not return to the home position after the transmission.
1: The setting(s) will return to the home position after the transmission.*
Switch 02 - Printing of various items on received messages
Digit Purpose
0
Mark to be printed at the receiving side to distinguish messages that are sent from
your machine when it is acting as a forwarding station (Feature Expander required)
0: Off 1: On *
1
Center mark 0: Off* 1: On
The center mark is not printed when the machine is used for making copies
2 Do not change this setting.
3 TSI printing 0: Off* 1: On
4 to 7 Do not change these settings.
Forwarding Mark
H
O
W
T
O
U
S
E
T
H
IS
M
A
N
U
A
L
HOW TO USE THIS MANUAL
11