Ricoh 2400L - Manual (Page 882)

LOCATION
For the best possible performance, install your machine in a place which satisfies
the following conditions.
❐ Not exposed to direct sunlight
❐ Well ventilated (air turnover at least three times per hour); to avoid the build-up
of ozone, make sure to locate the machine in a large well-ventilated room
which has an air turnover of more than 30 yd
3
/hr per person.
❐ Level
❐ Not subject to vibration
❐ Away from other electronic equipment, to avoid interference
❐ Away from areas containing corrosive gas
❐ Dust-free
❐ Condensation-free
❐ Temperature 63 to 82
°
F
❐ Humidity 40 to 70% RH (do not install near a humidifier)
❐ Away from heaters and air conditioners, to
avoid sudden changes of temperature
❐ Within 5 yards of a three-pin grounded
power outlet (115 Volts, 60 Hz)
❐ With the clearance as shown on the right
Note: This machine generates a certain amount of ozone. Although the amount
generated is within safety requirements, it is recommended that, to avoid
ozone buildup, you install the machine in a room which is properly venti-
lated.
APPENDIX INSTALLATION AND INITIAL SETTINGS
4"
4"
4"
28"
IN
ST
AL
LI
NG T
H
E
MA
CHI
NE
191