Switch 03 - automatic printing of reports, Switch 04 - automatic printing of reports, various, Switch 05 - various – Ricoh 2400L User Manual
Page 229: Switch 06 home position

Switch 03 - Automatic printing of reports
Digit
Purpose
0
Transmission result report (memory transmission)
0: Off
1: On*
1
Do not change this setting.
2
Memory storage report
0: Off*
1: On
3
Polling reserve report (polling reception)
0: Off*
1: On
4
Polling result report (polling reception)
0: Off
1: On*
5
Transmission result report (immediate transmission)
0: Off
1: On*
6
Polling clear report
0: Off
1: On*
7
TCR
0: Off
1: On*
Switch 04 - Automatic printing of reports, Various
Digit
Purpose
0
Confidential reception report
0: Off
1: On*
1 to 6
Do not change these settings
7
Inclusion of part of the image on the following reports: Transmission Result Report,
Memory Storage Report, Polling Clear Report, Communication Failure Report,
Transfer Result Report, Transmission Deadline Report, Polling Confirmation List
0: No
1: Yes*
Switch 05 - Various
Digit
Purpose
0
Substitute reception
0: Off
1: On*
1
Memory reception if no RTI or CSI received
0: Possible
1: Not possible*
2, 3
Do not change these settings
4, 5
Restricted Access
Digit 5 Digit 4 Setting
Digit 5 Digit 4 Setting
0 0 Off*
0 1 On
1 X Do not use these settings.
6, 7
Energy Saver mode
Digit 7 Digit 6 Setting
0 0 Heater off
0 1 Heater energy saver mode*
1 X Do not use these settings
Switch 06 Home position
Digit
Purpose
0
Printing TTI
0: Off
1:On*
1
Do not change this setting
2
Closed network in transmission
0: Disabled*
1: Enabled
3
Do not change these settings.
4
Batch Transmission (Feature Expander required) 0: Off*
1: On
5 to 7
Do not change these settings.
HOW TO USE THIS MANUAL
12