Ricoh 2400L - Manual (Page 533)

3. The settings for switch 00 are now shown
on the bottom line of the display.
4. Press
k
until the settings for switch 09 are
shown.
KPAD/Y/j k
SWITCH 09 : 0000 0000
5. The setting that you need to change is
that for digit 1 (double underlined).
Set as shown opposite.
If you want to lock messages in memory
only from special terminals:
SWITCH 09 :0000 0001
If you want to lock all incoming mes-
sages, except those from special termi-
nals:
SWITCH 09 :0000 0011
6. Finish: Yes and Function.
List of Special
Terminals
(Function 81)
Memory Lock on/off
(Function 62)
Switch 09
Digit 7
(Function 63)
Result
Empty On ✕ All messages are
locked in memory.
Empty/Not empty Off ✕ No messages are
locked in memory.
Not empty On 0 Only messages from
special terminals are
locked in memory.
Not empty On 1 All messages are
locked in memory
except those from
special terminals.
Printing a Memory-Locked Message
If the Receive File indicator is blinking, a message has been stored using Memory
Lock. Print it using the following procedure.
1. Function 5 5 and Yes.
LOCK ID KPAD
llll
2. Input the Memory Lock ID.
Example: 4 6 3 3 from the ten keypad.
LOCK ID START/N
4633
3. Start.
NOTE: If the Receive File indicator is blinking, an incoming fax message has
been stored in the memory using the Memory Lock feature or
Confidential Reception feature.
To print the message using the Confidential Reception, see page 71.
AD
V
A
N
C
E
D
FE
A
T
U
R
E
S
ADVANCED FEATURES RECEPTION
77