Printing a sample of data on the reports – Ricoh 2400L User Manual
Page 582

Printing a Sample of Data on the Reports
For reference purposes, the machine prints the first few inches of the fax
message on the following reports.
❐
Communication Result Report
❐
File Reseve Report
❐
Polling Clear Report
❐
Communication Failure Report
❐
Transfer Result Report
❐
Polling Confirmation List
The procedure to switch this feature on or off is as follows (see page 168 if you
need more information about the User Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
SETTING? Y/j
PRINT LIST j
2. Yes.
The settings for switch 00 are now
shown on the bottom line of the display.
KPAD/Y/j k
SWITCH 00 :0000 0000
3. Press
k
until the settings for switch 04 are
shown.
The setting you need to use is digit 7.
KPAD/Y/j k
SWITCH 04 :0000 0000
4. If you wish to change the setting, press 7
on the ten keypad.
SWITCH04 :0000 0000
Digit 7 (Double underlined)
0: This feature is off
1: This feature is on
5. Finish: Yes and Function.
AUTOMATICALLY PRINTED REPORTS
REPORTS
126