Switch 03 - automatic printing of reports, Switch 04 - automatic printing of reports, various, Switch 05 - various – Ricoh 2400L User Manual
Page 878: Switch 06 home position

Switch 03 - Automatic printing of reports
Digit
Purpose
0
Communication result report (Memory Transmission)
0: Off
1: On*
1
Do not change this setting.
2
File reserve report
0: Off*
1: On
3
File reserve report (polling reception)
0: Off*
1: On
4
Communication result report (polling reception) 0: Off
1: On*
5
Transmission result report (immediate transmission)
0: Off
1: On*
6
Polling clear report
0: Off
1: On*
7
Journal
0: Off
1: On*
Switch 04 - Automatic printing of reports, Various
Digit
Purpose
0
Confidential reception report
0: Off
1: On*
1 to 6
Do not change these settings
7
Inclusion of part of the image on the following reports: Communication Result
Report, File reserve Report, Polling Clear Report, Communication Failure Report,
Transfer Result Report, Polling Confirmation List
0: Off
1: On*
Switch 05 - Various
Digit
Purpose
0
Substitute reception
0: Off
1: On*
1
Memory reception if no RTI or CSI received
0: Possible*
1: Not possible
2, 3
Do not change these settings
4, 5
Restricted Access
Digit 5 Digit 4 Setting
Digit 5 Digit 4 Setting
0 0 Off*
0 1 On
1 X Do not use these settings.
6
Energy Saver mode
0 Heater off
1 Heater energy saver mode*
7
Do not change this setting.
Switch 06 Home position
Digit
Purpose
0
Printing TTI
0: Off
1:On*
1
Do not change this setting
2
Closed network in transmission
0: Disabled*
1: Enabled
3
Do not change this setting.
4
Batch Transmission
0: Off
1: On*
5 to 7
Do not change these settings.
TECHNI
CAL
REFERENCE
TECHNICAL REFERENCE
ON/OFF SWITCHES AND USER PARAMETERS
187