Switching reports on/off – Ricoh 2400L User Manual
Page 390

Switching Reports On/Off
Some of these reports can be switched on or off.
To switch a report on or off, do the following. (See page 11 if you need more
information about the User Parameter settings adjustment procedure).
1 .Function 6 2 2 2 2 6 3 a nd Yes.
SETTING? Y/j
PRINT LIST j
2. Yes.
The settings for switch 0 are now shown
on the bottom line of the display.
KPAD/Y/j k
SWITCH 00 :0000 0000
3. Press
k
until the settings for switch 03 are
shown.
Each digit from 0 to 7 controls one of the
reports (except digit 1) as follows.
KPAD/Y/j k
SWITCH 03 :0000 0000
SWITCH03 :0000 0000
Digit 7 6 5 4 3 2 10
Digit
Purpose
0
Transmission result report (memory transmission)
0: Off 1: On
Default Setting: On
1
Do not change this setting.
2
Memory storage report
0: Off 1: On
Default Setting: Off
3
Polling reserve report
0: Off 1: On
Default Setting: Off
4
Polling result report (polling reception)
0: Off 1: On
Default Setting: On
5
Transmission result report (immediate transmission)
0: Off 1: On
Default Setting: On
6
Polling clear report
0: Off 1: On
Default Setting: On
7
TCR
0: Off 1: On
Default Setting: On
4. If you wish to change a setting, press the appropriate key on the keypad. For
example, to change digit 2, press 2 of the ten key pad.
5. Finish: Yes and Function
AUTOMATICALLY PRINTED REPORTS
REPORTS
174