Raritan Computer DKX416 - Manual (Page 65)

Chapter 2: Installation
55
Note: For security reasons, you must use the MPC standalone client
if you require modem access. Further, one modem on a client PC can
be used for only one device connection.
• Check Use Default Port Number to use the default port number
(5000). For TCP Ports, Dominion KX and IP-Reach are automatically
configured to use TCP Port 5000 when communicating with
MPC/RRC. If you do not want to use the default port number,
uncheck the checkbox and type the port number in the Port Number
field.
1. Update the Compression tab (not available for Generation 2 (G2)
Raritan devices):
a. Select the Connection Speed from the drop-down. IP Reach and
Dominion can automatically detect available bandwidth and not
limit bandwidth use, but you can also adjust this usage
according to bandwidth limitations. Depending on the Raritan
device in use, different options may be available.