Raritan Computer DKX416 User Manual
Page 136
Multi-Platform Client and Raritan Remote Client
126
4. If you select the "Display single cursor mode instructions" checkbox
the Single Cursor Mode dialog will open each time Single Cursor is
enabled in the application (see Single Mouse Mode/Dual Mouse
Mode (on page 99) for more information).
5. Select Auto-Color Calibration to enable it.
6. In the KVM Switch OSUI Hot Key panel, select the radio button next
to the hot key combination you would like to use.
7. In the Keyboard Type panel, click on the drop-down arrow and click
on your keyboard choice.
8. In the Broadcast Port panel, type the broadcast port number in the
Port field.
9. Click OK when finished. Click Apply any time during your selection
to apply an option you have chosen.
Upgrading Device Firmware
¾
To update a device's firmware:
1. Connect to the device by highlighting the device's icon in the
Navigator.
2. Click Tools > Update > Update Device to perform firmware
upgrades.
3. You will be prompted to locate a Raritan firmware distribution file
(*.RFP format), which can be found on the Raritan Website Firmware
Upgrades page: http://www.raritan.com/support/firmwareupgrades.