Raritan Computer DKX416 - Manual (Page 203)

Chapter 3: Administrative Functions
193
Note: No SNMP traps are generated for the Port Connect and Port
Disconnect trap when a user connects or disconnects a Dominion KX
device from the local (OSD) port.
SNMP Agent Configuration
Use the SNMP dialog to configure the SNMP connection between the
Dominion KX (SNMP Agent) and an SNMP manager.
1. In the Event Management window, click on the SNMP tab.
2. Click on the Enable SNMP checkbox to enable the SNMP Agent
feature; uncheck this checkbox to disable SNMP Agent.
3. In the Name, Contact, and Location fields, type the SNMP Agent's
(this Dominion unit's) name as it appears in the Navigator panel, a
contact name related to this unit, and where the Dominion unit is
physically located.
4. Type the Agent's Community Strings (the Dominion unit's strings)
and specify whether they are Read Only or Read/Write.
5. Configure up to five SNMP managers with by specifying their IP
Addresses, SNMP Port Numbers, and the Manager's Community
String.