Raritan Computer DKX416 - Manual (Page 143)

Chapter 2: Installation
133
3. In the Broadcast Port field, type the new port number in the Port
field and then click OK.
Note: If you want the application to autodiscover Raritan devices on the
new broadcast port you entered in the Options window, you must
configure all Raritan devices to use the new port number.
MPC Broadcast Port
By default, all Raritan devices send data through Port 5000. This network
traffic includes the autodiscovery broadcast. In the case of conflicts or to
deal with firewall issues, you may want to use a different broadcast port.
¾ To change the autodiscovery port from the default
broadcast port of 5000:
1. Select the device in the Navigator.
2. On the Tools menu, choose Options. The Options dialog appears.
3. On the Advanced tab, type the new port number in the Port field
and then click OK.
Note: If you want the application to autodiscover Raritan devices on the
new broadcast port you entered in the Options window, you must
configure all Raritan devices to use the new port number.