Raritan Computer DKX416 User Manual
Page 210
Local Factory and Password Reset
200
Local Factory and Password Reset
If you forget the administrator password, there is currently no way to
reset it to factory default to gain access. However, you can hard-reset a
Dominion KX unit with this special user name and password, as
described here.
• Type the user name admin and the password R*E*S*E*T. This
password is case-sensitive.
This user name and password work only from your local access port.
When working remotely, only the actual password assigned to
administrator will gain access.
When this sequence is recognized, the device will not allow access as
usual but will perform the specified reset action (Local Device Reset
mode) as specified in the KX Manager Security Settings panel.
If Enable Local Factory Reset is performed, reset the network and other
parameters from the local console and then reboot the Dominion KX
unit.
Note: Passwords can consist of twenty (20) alphanumeric characters on
the English keyboard, as well as the following symbols: !"#$%&'()*+,-
./:;<=>?@[\]^_`{|}~