Raritan Computer DKX416 - Manual (Page 36)

Multi-Platform Client and Raritan Remote Client
26
Upgrading Device Firmware
You will upgrade the Dominion KX's firmware using MPC or RRC. See
Upgrading Device Firmware (on page 126) in the Multi-Platform Client
and Raritan Remote Client (on page 26) section of this guide for more
information.
Note: When you upgrade a device, the device goes into a Maintenance
mode. All sessions are disconnected and the device can execute only
certain required software components. This allows the system to be in a
clean, well understood state so that firmware update operations can
occur reliably.
Updating User Passwords
After upgrading your firmware (see Upgrading Device Firmware (on
page 126)), the Change Password dialog automatically appears. Fill in
new password information. You are also able to manually change a
user's password at any time. See Changing a Password (on page 127).
Multi-Platform Client and Raritan Remote Client
Requirements and Installation
MPC Requirements and Installation Instructions
Note to CC-SG Users
If you are using Dominion KX II in a CC-SG configuration, do not use
the CC-SG proxy mode if you are also planning to use the Multi-
Platform Client (MPC).
MPC Minimum System Requirements
The minimum system requirements for the Multi-Platform Client are:
• CPU Speed: 1.0 GHz
• RAM: 512 Mbytes
Note: Running the client software on system configurations below either
of these specifications may impact performance and result in errors.