Raritan Computer DKX416 User Manual
Page 196
Power Control (Dominion KX only)
186
2. Connect the female RJ-45 connector of the P2CIM-PWR to any of the
available female system port connectors on the Dominion KX using a
straight through Cat 5 cable.
3. Power on the power strip.
4. Power on the Dominion KX unit.
Configuring the Power Strip
Once the power strip has been added, KX Manager will automatically
recognize that it is connected. The Device Tree in the left panel of the
window will change the appropriate target icon to indicate that a power
strip is connected to that port.
1. Select the power strip icon, right-click on it, and then click
Properties. When the Power Strip Properties dialog appears, type a
name for the new power strip and click OK.
2. In the Devices Tree, select the target server(s) powered through the
power strip. Right-click on the server icon and click Properties. The
PC Properties window appears.
3. Click on one of the Power Strip rows in the table and a list of
available power strips connected to the Dominion KX appears. Click
on the appropriate power strip.
4. Click on the Outlet drop-down that is associated the the selected
power strip. A list of available outlets is displayed. Select the outlet
to which the device is connected.