Raritan Computer DKX416 - Manual (Page 161)

Chapter 3: Administrative Functions
151
¾ To configure network settings:
1. On the Setup menu, click Configuration, and then click Network.
The Network Configuration window appears.
2. Configure the network using the following configuration elements:
ƒ Manager name: Type a unique name for the device. The default
name for a Dominion KX unit is: “Dominion-KX” and for a
KX101 unit is KX_KIM-, for
example, a KX101 with serial number S00002 would have a
default name of KX_KIM-00002. Remote users will see and use
this name to identify this particular device. However, if an MPC
or RRC user has created a Connection Profile for a device, that
user will see the Description field from the Profile instead.
Note: Spaces are NOT permitted in the Manager Name.
ƒ Enable modem interface: (Dominion KX only) Enables the
device's internal modem port to allow remote users to dial into
the device. Default value: Disabled.