Raritan Computer DKX416 - Manual (Page 250)

Remote Access
240
Question Answer
What is the file size of
the applet used to access
the Dominion KX? How
long does it take to
retrieve? The applet used to access the Dominion KX is approximately
1.4MB in size. The following chart describes the time required to
retrieve the Dominion KX's applet at different network speeds:
100Mbps Theoretical 100Mbit
network speed
0.1 seconds
60Mbps Likely practical 100Mbit
network speed 0.2 seconds
10Mbps Theoretical 10Mbit
network speed 1.1 seconds
6Mbps Likely practical 10Mbit
network speed 2 seconds
512Kbps Cable modem download
speed (typical) 22 seconds
56Kbps Dial-up modem
theoretical speed 3 minutes
38Kbps Likely practical dial-up
modem speed 5 minutes
How do I access servers
connected to the
Dominion KX if the
network ever becomes
unavailable? The Dominion KX offers a dedicated modem port for attaching
an external modem. With this dedicated modem, your servers
can still be remotely accessed in the event of a network
emergency. Furthermore, the Dominion KX's Local Consoles
always allow access to your servers from the rack, no matter the
network condition.
Can non-Windows users
use RRC? Yes, using Raritan MPC, non-Windows users can connect to
target servers through the Dominion KX. MPC can be run via
web browsers and standalone. Refer to Raritan's MPC User
Guide for more information.
My connection dropped
and I got the error
message “There was an
unexpected
communications error -
connection terminated” -
what should I do? This might happen based the frequency with which you try to
connect via modem. Reboot the KX unit and modem, and for
future connections, wait at least two (2) minutes between
attempts.