Raritan Computer DKX416 - Manual (Page 202)

Event Management
192
2. On the Setup menu, choose Configuration and then choose Events.
The Event Management dialog appears.
3. Click on the Event Management tab to select and configure events
that you want to generate SNMP notification events (traps).
4. Click on the checkboxes associated with the event line items you
wish to enable or disable. Enable or disable entire categories by
checking or unchecking the specific category line checkboxes. See the
SNMP Trap table in the SNMP Agent Configuration (on page 193)
section for additional information on SNMP agents and traps.
5. To configure the Dominion unit as an SNMP agent, click on the
SNMP tab. Otherwise, click OK when finished.