NEC NEAX NDA-24349 - Manual (Page 94)

Chapter 5 Station Equipment
Page 5- 18 NEAX2000 IPS Request For Proposal (RFP) Reference Guide
NDA-24349 Issue 4
Call Handling Features
• Four Local Soft Key Controls (detail functions are dependent on PBX)
• Large Message Waiting LED
• 24 Character, 3-Line LCD
• Built-in Headset Jack Connector
• Speed Dial/DSS Buttons
• Programmable Line Keys with 2-Color LED
• Eight Dedicated Function Keys (Feature, Recall, Conf, Redial, Hold, Transfer, Answer & Speaker)
• Built-in Half Duplex Hands-free Unit
Convergence Features
• Two 10/100 full duplex Ethernet ports- One which connects the D term IP to the local Ethernet
Network, the other provides connectivity for a local workstation.
• Three types of powering options:
- Local AC adapter
- CDP (Cisco Discovery Protocol) power for those infrastructures with an installed base of Cisco
gear
- Spare pair power across the Ethernet network.
• Transportable QoS, which follows the user no matter where they log in.
• Multiple Voice Coding support, which automatically negotiates to a common setting.
- G.711 providing an international standard for encoding/decoding telephony signals on a 64
Kbps Non-compressed channel.
- It also supports the compression algorithms G.729A (8Kbps) and G.723.1 (5.3/6.3 Kbps ).
Line Conditions
ITR-8D-3
Max. 328 ft. between Ether/IP-PAD and Router/ Switching Hub
ITR-16D-3
ITR-16LD-3
Max. 328 ft. between Ether/IP-PAD and Router/ Switching Hub