Wireless – short text message notification (oai) – NEC NEAX NDA-24349 User Manual
Page 345
![background image](/manuals/193093/345/background.png)
Chapter 16 Wireless System
NEAX 2000 IPS Request For Proposal (RFP) Reference Guide Page 16-7
NDA-24349, Issue 4
Wireless – Short Text Message Notification (OAI)
This feature enables a Short Text Message (hereafter, STM), once arrived at a mail box of the
STM Server (external equipment), to be automatically distributed to the addressee D
term
PS III
via Open Application Interface (OAI). This feature also provides “TM Full” notification on the
display (LCD) of the address D
term
PS III that is busy, and if the D
term
PS III is out of zone, the
feature makes retransmission of the STM after the PS returns to the zone.
Note:
This describes STM Facilities available for external STM OAI application. Actual functionality depends on
the application.
Configuration Application:
Integrated Type
Service Conditions
The feature is available only for My Line (L1) of a two-line D
term
PS III (not provided for Sub Line (L2)).
1. STM transmission route is only one way: STM server
→ D
term
PS III
2. One STM can contain 128 byte data at the maximum.
3. The following features are not available at this feature.
Call Forwarding - All Calls
Call Forwarding - No Answer
Call Forwarding - Busy Line
Call Forwarding - Not Available
4. If the following occur, STM is not distributed, but stays in the mail box of the STM server. The STM
is safely transmitted later by this feature’s retransmission function.
Addressee
D
term
PS III is out of zone.
Addressee
D
term
PS III is power off.
The line of addressee D
term
PS III is busy, on hold, or ringing.
D
term
PS III is in a state of hand-over. Note
5. With this feature, PCS Roaming is not available.
Note:
When hand-over unexpectedly starts while the message transmission is partially in progress, this feature
sees this as a squelch disconnection and performs message retransmission after the hand-over is completed.