NEC NEAX NDA-24349 User Manual
Page 31
Chapter 1 Introduction
NEAX2000 IPS Request For Proposal (RFP) Reference Guide Page 1-25
NDA-24349, Issue 4
IPS
DM
System Capacity (Cont.)
Capacity Per MC
Number of PHYSICAL MODULAR CHASSIS
1
2
3
Built-in Router
Max. 5 cards per MODULAR CHASSIS
DTMF Sender
Max. 32 circuits per system
DTMF Receiver
16
32
SN716 Desk Console
8
Attendant Terminal (D
term
ATT Position)
Max. 8 per system
SMDR Interface
Max. 1 Interface port per system
PMS Interface
Max. 1 Interface port per system
ACD / MIS or OAI Interface
Max. 1 Interface port per system
DID Dial Conversion
1000
Call Forwarding-Outside Set
496
Authorization Code / Forced Account Code / Remote
Access to System(DISA) Code
3000
Message Reminder Set
1024
Name Display / Guest Name Display
512
Speed Calling-Station (Station Speed Dial) Set
10000
MP built-in SMDR Call Record
1280
Note 1: Each Modular Chassis has 24 Virtual LT Ports that can only be used to expand the PAD channels from 8 to
32 using the 8IPLA w/24IPLA.
Note 2: When 8LC card is used, the 4LC w/RGU is required which does not provide Message Waiting indicator.
Note 3:
The total number of trunk line and DTI channel shall be 256 or less.
(Each trunk line and DTI channel are required to assign the “Trunk Number” by system data
programming and maximum number of system parameter for “Trunk Number” is 256.)