NEC NEAX NDA-24349 - Manual (Page 150)

Chapter 8 System administration
Page 8- 2 NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
NDA-24349, Issue 4
Customer Administration Terminal (CAT)
The Customer Administration Terminal (CAT) is a digital multi-function telephone (D term ) which
is equipped with function keys, a dial pad and LCD and interfaces with the system via the MP
card. Programming of the system can be done from selected Multiline Terminals with LCD.
The designated Multiline Terminals can be placed in program mode, and system data can then
be changed. To prevent unauthorized changes, password levels are assigned, providing
authorization for access to certain areas of programming and denying access to others.
Service Conditions
1. Programming from a Customer Administration Terminal can only be accomplished when the system
is online.
2. All Multiline Terminals with LCD scanned during initialization will be Customer Administration
Terminals.
3. The commands CM00 (Office Data All Clear) and CM01 (Office Data Partial Clear) cannot be
accessed from the CAT. The CAT cannot delete itself from the system program.
4. Only two Customer Administration Terminals can be in program mode at the same time.
5. The data that can be changed from the CAT can be limited by the Password level assigned. There
are eight levels of Passwords that can be assigned in system programming. The relation between
Password level and access to available commands is also assigned in system programming.
6. A password can consist of a maximum of any eight digits with the following limitation: The password
cannot be CCCCCCCC or FFFFFFFF.
7. Caution should be exercised when assigning Passwords to command authorization levels. If a
password is forgotten, access to system programming will be limited and a system initialization with
subsequent programming may be required.
8. When the Customer Administration Terminal is offline for programming, it cannot access normal
terminal functions.
Maintenance Administration Terminal (MAT)
The Maintenance Administration Terminal (MAT) is a personal computer (PC) that is used for
programming and maintenance of the NEAX 2000 IPS
system. The MAT can provide a
Maintenance Printout, Peg Count information and fault message output. Additionally, the MAT
can be used to Remove and Restore to service any station in the system and can read or save
system data from disks. The MAT can assign the Key Data for the Attendant Console. The
MAT requires an IBM or compatible PC running Microsoft Windows 98, NT 4.0, 2000 or XP
and MATWorX.
MATWorX is a Graphical User Interface (GUI) program that provides an efficient method for
manipulating the PBX database. This program contains extensive help files, Usage Wizards
and Tool Tips, with hyperlinks imbedded in the text. The hyperlinks provide quick access to the
appropriate Add-In modules. Add-In modules provide a user-friendly, intuitive method for
customizing the PBX database.
MATWorX add-ins makes it easy for you to add or remove PBX features at any time. Add-ins
are modular components that let you program specific features such as Caller ID, Station
Assignments, Day/Night Modes, and Line Key Assignments.