NEC NEAX NDA-24349 - Manual (Page 185)

Chapter 9 Descriptions
NEAX 2000 IPS Request for Proposal (RFP) Reference Guide Page 9- 27
NDA-24349, Issue 4
I-Hold / I-Use Indication
Multiline Terminals provide indication of which line
keys have been placed on Hold, or are in use by
that Multiline Terminal. The LED associated with
the line key will give the appropriate indication.
Microphone Control
All Multiline Terminals are equipped with a
Microphone Control button with an associated
LED.
Multiple Line Operation
This feature allows for the appearance of multiple
lines on the Flexible Line Keys and feature keys of
all Multiline Terminals.
Mute Key
This feature allows the distant extension user, of a
station user that presses a mute key during
conversation, not to hear the station user's voice
though the station user can hear the distant
extension user's voice. By pressing the mute key
again, the mute status returns to original
conversation.
My Line Display Idle
This feature allows the display of the Prime line in
the LCD display of the Muliline Terminal during an
Idle state.
Off-Hook Voice Announcement
This feature provides a secondary voice path to
the Multiline Terminal with an APR or APA unit.
This allows the station to receive a voice call
through the speaker while on a handset call on the
Primary Extension, a secondary extension, or a
Direct Trunk Line Appearance.
Prime Line Pickup
This feature allows a Multiline Terminal user to go
off hook and originate a call from the line assigned
as the Prime Line without depressing the
associated line key.
Recall Key
Each Multiline Terminal is equipped with a Recall
Key that is used to generate a hookflash to access
features provided by the outside exchange, or to
abandon a call while retaining the line for
origination of another call.
Relay Control Function Key
This feature provides a Multiline Terminal with the
ability to activate/deactivate relays (on a PN-
DK00) to control external devices.
Ring Frequency Control
The ring frequency of the Multiline Terminal can
be controlled on a station basis in system
programming (eight ro fourteen frequencies are
available) or by use of a function key on the
Multiline Terminal.
Ringing Line Pickup
This feature provides the ability to answer any call
ringing into a Multiline Terminal by just lifting the
handset.
Soft Keys
According to the status of the Multiline Terminal,
function keys (Soft Keys) are displayed in the third
line on the LCD. If the status of Multiline Terminal
changes, the Soft Keys will change automatically.
Also if the Help key is pressed, explanation of
indicated Soft Keys are shown on the LCD.
Volume Control
Multiline Terminals are equipped with common
Volume Control keys for:
• Built-in Speaker / Handset Receiver Volume
• Ring Volume
• C.O. Transmission Level
• LCD Contrast
• Ring Tone Frequency