NEC NEAX NDA-24349 - Manual (Page 219)

Chapter 10 System Input/Output (I/O) Interfaces
NEAX 2000 IPS Request for Proposal (RFP) Reference Guide Page 10-11
NDA-24349, Issue 4
Service Conditions
1. Only one Interface Port can be provided for PMS.
2. The system sends information relating to the following features to the PMS upon request from the
PMS:
ƒ Do Not Disturb
ƒ Room Cut-off
3. The NEAX 2000 IPS system can support PMS Model-60 via AP00-B or PMS Model 90/120 via
TCP/IP connection.
4. The AP00-B with MRC-E program does not support PMS.
Hardware Required for PMS
Description Qty Remarks
SPN-CP24A MP (UA) 1 per system MP
SPN-AP00B MRC-C (AP) 1 per system Control card for PMS
PZ-M606-A (ETHER) 1 per system MP Mounted card One per MP
RS RVS-4S CA-C 1 per SMDR/PMS AP00-VMS, 13.1ft (4.0m)
RS NORM-4S CA-A 1 per SMDR/PMS AP00-MODEM, 13.1ft (4.0m)
RS PRT-4S CA-A 1 per Printer AP00 Printer
PMS Terminal Serial 1 per system Model 60 only
PMS Terminal over IP 1 per system Model 90/Model 120
SMDR Terminal 1 per system
Printer As required
MODEM As required