NEC NEAX NDA-24349 - Manual (Page 312)

Chapter 14 Common Channel Inter-Office Signaling (CCIS)
Page 14-20 NEAX 2000 IPS Request For Proposal (RFP) Reference Guide
NDA-24349, Issue 4
Required Equipment for Analog CCIS
Equipment
Name
Functional
Name
Function
PN-AP00-B
AP00
Application Processor Card
Provides four RS-232C ports, and is used for
SMDR, Hotel Printer,
CIS, PMS, MCI, CS report functions.
One card per system.
PN-SC00
CCH
Common Channel Handler Card
Transmits/receives signals on the common signaling
channel of CCIS.
PN-2ODTA
ODT
2-line Out Band Dialing Trunk Card
Used as either a 2-wire E&M trunk or a 4-wire E&M
trunk.
Equipped with –48V DC-DC on-board power supply.
Both Circuits 0 and 1 must be set to the same
purpose
(2-wire or 4-wire) in one card.
PZ-M537
EXPMEM
Memory Expansion Card for AP00 Card
The system capacity is expanded when PZ-M537 is
mounted on
PN-AP00-B (AP00) card.
Memory Expansion for AP00 is shown in the table
below.
SYSTEM CAPACITY NO EXPMEM WITH EXPMEM
SMDR call record 1600 27000
Required Equipment for CCIS Networking via IP
Description Remarks
CCIS via IP (non Peer-to-Peer)
SPN-IPTB Network
Interface:
ETHER/FAST ETHER
SPN-4VCTI Codec Card for IP Trunk
CCIS via IP (Peer-to-Peer)
PZ-M606-A
On board Ethernet Interface Card
(ETHERNET TCP/IP)
SPN-8IPLA IP PAD-B IP Interface card for IP Pad
PZ-24IPLA 24-channel daughter board for 8IPLA