NEC NEAX NDA-24349 - Manual (Page 218)

Chapter 10 System Input/Output (I/O) Interfaces
Page 10-10 NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
NDA-24349, Issue 4
PMS Interface
ƒ PMS with AP00-B on an RS-232C Interface
Item Description
Data Rate
1200, 2400, 4800, 9600 bps, asynchronous, software
selectable
Note 1
Operating Mode Half Duplex
Electrical Interface
Characteristic
EIA RS-232C electrical standard interface
Signal Form EIA RS-404
Interface Distance
Max. 15 m (49.2 ft.) between PBX and PMS (without modem)
NOTE 2
Word Framing
10 bits (1 start, 7 data, 1 parity, 1 stop) or 11 bits (1 start, 7
data, 1 parity,2 stop)
Parity VRC
No parity, even parity, odd parity; selected by PBX system
data
Parity LRC Exclusive OR of message text
Frame Contents US ASCII 7-bit codes
Control Contention
Priority Sequence
Primary office: PBX
Secondary office: PMS
Note 1: For the Port 1 and Port 3, data speed 9600 bps cannot be used.
Note 2: When modems are used, full duplex asynchronous type modems are required.
ƒ Bulit in PMS over IP
Item Description
Physical layer Ethernet
Connection Layer The Ethernet packet format complies with the DIX standard
TCP/IP core protocol ARP, IP, ICMP, UDP, and TCP
Socket interface Complies with the 4.3BSD socket interface
Transport Protocol TCP stream-type protocol
Application Port Number 60050 (Fixed)
Number of Connections 1 conncetion
Client/Server
Server: PBX
Client: PMS
Frame Contents US ASCII 7-bit codes
Pseudo Normal Restriction
Condition 1. At connection release
2. Status monitoring text