NEC NEAX NDA-24349 User Manual
Page 129
Chapter 6 Trunking
NEAX 2000 IPS
Request for Proposal (RFP) Reference Guide
Page 6-5
NDA-24349, Issue 4
PN-2DATA
This circuit card is a trunk card that supports the announcement function for a maximum of two
announcements without external announcement equipment. This package supports only the
following announcement arrangements:
Two 60-second announcements.
Single or multiple connections to an announcement is allowed.
Announcements will be recorded from a D
term
, Single line, or Attendant Console.
PN-4DATC
This circuit card is a trunk card that supports the announcement function for a maximum of four
announcements without external announcement equipment. This package supports only the following
announcement arrangements:
Four 120-second announcements.
Single or multiple connections to an announcement is allowed.
Announcements will be recorded from a D
term
, Single line, or Attendant Console.
PN-IPTB (IPT)
The PN-IPTB circuit card is an IP Trunk card.
Accommodates the IP network and transmits/receives compressed voice or signals over an
IP network.
Used together with maximum of four PN-4VCTI cards (16 channels).
10 BASE-T/100 BASE-TX twisted pair cable is connected directly to this card.
PN-4VCTI (VCT)
The PN-4VCTI circuit card is a 4-channel CODEC card for IP Trunks; four VCT cards per IPT card.
Voice compression protocols: G723.1, G729A, G711, FAX (14.4kbps), DTMF signals
Used together with PN-IPTB card
PN-8RSTG (DTMF Receiver)
The RSTA card receives DTMF signals sent by single line telephones, DID lines, and tie lines. This
card mounts in any LT slot in any PIM and provides 8 RST circuits per card. Usually at least one card
per system is required. This card uses 8 time slots. This card is required for a 512 Port System. The
128 Port System’s CPU is equipped with 4 RST circuits.
PN-4RSTB (MF Receiver for T1 MF ANI)
This MF receiver card is required when using the T1-ANI feature. This card receives the Multi-
Frequency (MF) signals sent by the CO to ID the calling party. One RSTB card provides four MF
receiver ports. This card mounts in any AP slot in PIMs 0 to 7.