NEC NEAX NDA-24349 - Manual (Page 206)

Chapter 9 Feature Descriptions
Page 9- 48 NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
NDA-24349, Issue 4
Group Call – 2Way Calling
This feature permits a D term PS III, Multiline
Termianl and Single Line Telephone to page a
maximum of fifteen parties simultaneously,
except the group call leader. After one of
paged parties answers, the paging becomes
the 2 Way Calling between the leader and the
first answered party, and paging other parties
stops automatically. The D
term PS III is
assigned through system data as participants
in the simultaneous paging groups.
Handover
When the signal transmission quality
becomes inferior, a D
term PS III re-originates a
call automatically and seizes another radio
channel, making the WCS handover the call
to another zone transceiver to maintain the
speech quality.
Individual PS Calling
This feature allows the calling party to page
the individual D
term PS III.
Last Number Redial – PS
This feature enables a D term PS III to store the
numbers dialed in the previous five calls
including the last number dialed. The stack
dial numbers are sequentially displayed on
the LCD, allowing the station user to make an
outgoing call by selecting the desired dialed
number from the display.
Multi-Line Operation – PS
D term PS III equipped with two line keys, L1
key and L2 key, and different station numbers
can be assigned to each of two lines. The
number assigned to L1 key of the PS is called
My Line and the other number assigned to L2
key is called Sub Line. My Line and Sub Line
of a D
term PS III can be assigned to appear on
the Flexible Line Keys of a Multiline Terminal
and the Multiline Terminal can share the D
term
PS III lines.
Multi-Site Roaming
D term PS III user can originate or receive a call
in any place of a network provided by multiple
PBXs which communicate through JT-Q931-
a.
NEAX 2000 IPS Wired for Wireless
This feature allows the NEAX 2000 IPS to
have the Wireless PBX feature. NEAX 2000
IPS provides several integrated features
adding on the adjunctive configuration.
Number Sharing
This feature allows the Multiline Terminal user
to have a D
term PS III as Sub Station and to
get service with one telephone number.In
case that one user has both a Multiline
Terminal and D
term PS III, with this feature
used the user is not required to have two
separate telephone numbers.
-When a user is at his desk, a call is
terminated to his D
term .
-When a user leaves thier desk with D term PS
III, a call is automatically terminated to the
D
term PS III.
In this feature, the Multiline Terminal and D term
PS III are referred as Main Station and Sub
Station, respectively.
Out of Zone Indication
When a D term PS III user moves out of the
service area and the electric field strength
becomes weak, this feature notifies the user
with a warning tone and an LCD display
.
Overlap Dialing
This feature allows a D term PS III user to
receive dial tone and dial the desired number
to originate a call.
Preset Dialing
This feature allows a D term PS III user to
confirm the number to be dialed before
originating a call.