IBM SG24-4817-00 - Manual (Page 291)

This soft copy for use by IBM employees only.
chassisChange TRAP-TYPE
ENTERPRISE node
DESCRIPTION
″
A chassisChange trap is used to indicate that a configuration
change has occurred. The actual variables that changed
are included in the variables section of the PDU.
″
::= 107
chassisModuleDown TRAP-TYPE
ENTERPRISE node
DESCRIPTION
″
A chassisModuleDown trap indicates that management communications
with a slot has been
broken.
This event usually occurs when a module has been
physically removed from the concentrator. However, it
is possible for this event to occur when the particular
module fails.
″
::= 116
chassisModuleUp TRAP-TYPE
ENTERPRISE node
DESCRIPTION
″
A chassisModuleUp trap indicates that management communications
with a slot has been
established.
This event usually occurs when a module has
physically been inserted into the concentrator. The
variable chipModType indicates the module type inserted.
″
::= 117
END
Appendix E. IBM ATM Campus Switch Private MIBs
275