IBM SG24-4817-00 - Manual (Page 290)

This soft copy for use by IBM employees only.
::= { ocInvModEntry 8 }
ocInvModMfrDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The date in yymmdd format that this module was manufactured.
If the instance value is unknown, N/A will be returned.
″
::= { ocInvModEntry 9 }
ocInvModNotePad OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
Note pad area reserved for the module. This area
contains information pertaining to the module such as
service or hardware upgrade information.
If the instance
value is unknown, N/A will be returned.
″
::= { ocInvModEntry 10 }
-- Chassis related Traps sent by the 8260 ATM agent.
-- Traps are defined using the conventions in RFC 1215.
chassisSlotDown TRAP-TYPE
ENTERPRISE node
DESCRIPTION
″
This trap indicates that a module is down.
Usually, this trap is sent when the module
has been removed.
Sometimes, this trap is sent when management communications
with this module have been broken.
In this case, it may not
be possible to distinguish between a removed and a failed
module.
″
::= 102
chassisSlotUp TRAP-TYPE
ENTERPRISE node
DESCRIPTION
″
This trap indicates that a module is up.
Usually, this trap is sent when the module is
inserted into the hub.
Sometimes, this trap is sent when management communications
have been restored to a module where they had previously
been broken.
″
::= 103
chassisEnvironment TRAP-TYPE
ENTERPRISE node
DESCRIPTION
″
A chassisEnvironment trap indicates a change in the
concentrator
′
s environment has occurred. The variables
supplied indicate what exactly changed.
″
::= 104
274
ATM Workgroup Solutions: Implementing the 8285 ATM Switch