IBM SG24-4817-00 - Manual (Page 244)

This soft copy for use by IBM employees only.
by the VPI and VCI values allocated to it.
″
INDEX { atmQ2931ConfIndex,
atmQ2931SiVpi,
atmQ2931SiVci }
::= { atmQ2931ConfTable 1 }
AtmQ2931ConfEntry ::= SEQUENCE {
atmQ2931ConfIndex
INTEGER,
atmQ2931SiVpi
INTEGER,
atmQ2931SiVci
INTEGER,
atmQ2931T303
INTEGER,
atmQ2931T308
INTEGER,
atmQ2931T309
INTEGER,
atmQ2931T310
INTEGER,
atmQ2931T316
INTEGER,
atmQ2931T317
INTEGER,
atmQ2931T322
INTEGER,
atmQ2931T398
INTEGER,
atmQ2931T399
INTEGER,
atmQ2931SetupRetry
INTEGER,
atmQ2931ReleaseRetry
INTEGER,
atmQ2931RestartRetry
INTEGER,
atmQ2931StatusRetry
INTEGER }
atmQ2931ConfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The ifIndex value of the ATM interface which, with the
signalling channel defined by its Vpi/Vci values,
uniquely identifies this entry.
″
::= { atmQ2931ConfEntry 1 }
atmQ2931SiVpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The Vpi value which, with the Vci value specified in
atmQ2931SiVci, defines the signalling channel for this
entry.
Usually, there is one signalling channel per interface
228
ATM Workgroup Solutions: Implementing the 8285 ATM Switch