IBM SG24-4817-00 - Manual (Page 250)

This soft copy for use by IBM employees only.
atmSvcCallingNumber
AtmAddress,
atmSvcCalledNumber
AtmAddress,
atmSvcClear
INTEGER,
atmSvcCreationTime
DateAndTime,
atmSvcVpi
INTEGER,
atmSvcVci
INTEGER }
atmSvcInterfaceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The ifIndex value of the ATM interface used by this
SVC.
″
::= { atmSvcEntry 1 }
atmSvcSiVpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The Vpi value which, with the Vci value specified in
atmSvcSiVci, defines the signalling channel for this
entry.
Usually, there is one signalling channel per interface
defined by Vpi=0,Vci=5.
″
::= { atmSvcEntry 2 }
atmSvcSiVci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The Vci value which, with the Vpi value specified in
atmSvcSiVpi, defines the signalling channel for this
entry.
Usually, there is one signalling channel per interface
defined by Vpi=0,Vci=5.
″
::= { atmSvcEntry 3 }
atmSvcCallReference OBJECT-TYPE
SYNTAX INTEGER (0..8388607)
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The Q2931 call reference value used for this SVC.
″
::= { atmSvcEntry 4 }
atmSvcEndPointReference OBJECT-TYPE
SYNTAX INTEGER (0..16383)
ACCESS read-only
STATUS mandatory
DESCRIPTION
234
ATM Workgroup Solutions: Implementing the 8285 ATM Switch