IBM SG24-4817-00 - Manual (Page 227)

This soft copy for use by IBM employees only.
wrapped, and no signal is detected on the
line.
- wrap-far-end-idle:
the port is in wrap-far-end
mode, ie the remote end of the line is
wrapped, and a valid signal is detected
on the line.
- wrap-far-end-failing:
the port is in wrap-far-end
mode, ie the remote end of the line is
wrapped, and an internal error is detected.
- wrap-far-end-failing-line:
the port is in wrap-far-end
mode, ie the remote end of the line is
wrapped, and an invalid signal is detected
on the line.
When disabled, the port may be in only one of the following
states:
- unknown, disabled-failing, disabled-nosignal or
disabled-idle, disabled-no-bandwidth.
″
::= { interfaceEntry 6 }
interfaceAtmAccess OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
uni (2),
ssi (3),
nni (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
″
The type of ATM access offered on this port:
- UNI: User Network Interface
- SSI: Switch-to-Switch interface
- NNI: Network-to-Network interface.
The ATM access can be modified only when the
port is disabled.
″
::= { interfaceEntry 7 }
interfaceMediaType OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
monomode-fiber (2),
multimode-fiber (3),
twistedPair (4),
utp (5),
stp (6),
coaxial-cable (7),
backplane (8),
long-range-fiber (9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The type of media supported on this port.
″
::= { interfaceEntry 8 }
Appendix E. IBM ATM Campus Switch Private MIBs
211