IBM SG24-4817-00 - Manual (Page 171)

This soft copy for use by IBM employees only.
−
ObjectStore requires 8 MB of paging space beyond the paging space
requirements of any existing applications.
−
One of the following to install the software:
- 4mm tape drive
- 8mm tape drive
- 1/4-inch tape drive
- CD-ROM drive
• A physical connection for running TCP/IP between IBM 8285 and Nways
Campus Manager ATM station
The requirements for the connection is as follows:
−
Either Nways Campus Manager ATM directly attaches an ATM
network to the IBM 8285 or attaches a legacy LAN via an ATM
bridge/router.
−
The following protocols are supported between the IBM 8285 and the
ATM edge device, the Nways Campus Manager ATM workstation or
the ATM bridge/router. The same protocol should be supported on
both ends:
- CIP (RFC1577)
- Ethernet (DIX/Ethernet or IEEE 802.3) LAN Emulation
(Forum-Compliant LAN Emulation V1.0)
- Token-Ring LAN Emulation (Forum-Compliant LAN Emulation
V1.0)
Note
As no Forum-Compliant LAN Emulation driver is currently
available for the AIX environment, the Nways Campus Manager
ATM station should attach a legacy LAN and have the connection
via an ATM bridge/router that supports Forum-Compliant LAN
Emulation when Forum-Compliant LAN Emulation is used.
Software Requirements:
• AIX V4.1.4 or AIX V4.2 for Campus Manager - ATM
• AIX V4.1.3, V4.1.4 or AIX V4.2 for Campus Manager - LAN and Router and
Bridge Manager
• AIX Windows Environment/6000 V11R5
In order to have drag and drop functions working properly under AIX
V3.2.5, the PTF U442598 (x11rte.obj) and U441397 (x11rte.motif1.2) are
required.
• OSF/Motif Version 1.2
• IBM SystemView NetView for AIX, V3R1, V4R1 Server, Client with latest
PTFs, namely:
−
With NetView for AIX V3, PTF U444911 is required.
−
With NetView Server for AIX V4, PTF U444912 is required.
• ObjectStore 4.0.2 Runtime (shipped with Campus Manager Suite, Campus
Manager - LAN, and Campus Manager - ATM packages) is required for:
Chapter 8. IBM 8285 Management
155