IBM SG24-4817-00 - Manual (Page 256)

This soft copy for use by IBM employees only.
atmSaalConfSiVci
INTEGER,
atmSaalState
INTEGER,
atmSaalTimerPoll
INTEGER,
atmSaalTimerKeepAlive
INTEGER,
atmSaalTimerNoResponse
INTEGER,
atmSaalTimerCC
INTEGER,
atmSaalTimerIdle
INTEGER,
atmSaalMaxCC
INTEGER,
atmSaalMaxPD
INTEGER,
atmSaalMaxStat
INTEGER }
atmSaalConfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The ifIndex value of the ATM interface which, with the
signalling channel defined by its Vpi/Vci values,
uniquely identifies this entry.
″
::= { atmSaalConfEntry 1 }
atmSaalConfSiVpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The Vpi value which, with the Vci value specified in
atmSaalConfSiVci, defines the signalling channel for this
entry.
Usually, there is one signalling channel per interface
defined by Vpi=0,Vci=5.
″
::= { atmSaalConfEntry 2 }
atmSaalConfSiVci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The Vci value which, with the Vpi value specified in
atmSaalConfSiVpi, defines the signalling channel for this
entry.
Usually, there is one signalling channel per interface
defined by Vpi=0,Vci=5.
″
::= { atmSaalConfEntry 3 }
atmSaalState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
240
ATM Workgroup Solutions: Implementing the 8285 ATM Switch