IBM SG24-4817-00 - Manual (Page 265)

This soft copy for use by IBM employees only.
atmPvcBackwardType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-write
STATUS mandatory
DESCRIPTION
″
The first parameter used to define the
policy requested for this PVC.
″
::= { atmPvcEntry 10 }
atmPvcForwardType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-write
STATUS mandatory
DESCRIPTION
″
The type of policy requested for this PVC.
″
::= { atmPvcEntry 11 }
atmPvcBackwardParm1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
″
The fourth parameter used to define the
policy requested for this PVC.
″
DEFVAL { 0 }
::= { atmPvcEntry 12 }
atmPvcForwardParm1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
″
The third parameter used to define the
policy requested for this PVC.
″
DEFVAL { 0 }
::= { atmPvcEntry 13 }
-- A list of all the End-Points for each PVC defined.
atmPvcEpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmPvcEpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″
This table lists the characteristics of the remote
end-points of defined PVCs.
There is at least one entry for each PVC defined in the atmPvcTable.
″
::= { atmPvc 3 }
atmPvcEpEntry OBJECT-TYPE
SYNTAX AtmPvcEpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″
Entries of atmPvcEpTable.
One entry is automatically created by the agent when a
PVC is created in the PVC Table.
No additional entry can be created in this table if the
Appendix E. IBM ATM Campus Switch Private MIBs
249